GEOTEXTILES

TERRATEX PP

TerraTex PP Non Woven geotextile range is needle punched 100% polypropylene (PP) geotextile used in separation, filtration and reinforcement applications. Manufactured by a quality company according to ISO 9001 quality standards.

TERRASTOP

Terrastop Non Woven geotextile range needle punched 100% polyester (PET) geotextile used in separation, filtration and reinforcement applications. Manufactured by a quality company according to ISO 9001 quality standards.

Geotextile Selection for Separation & Filtration - RTA R63

Statistical Acceptance Scheme for RTA R63

TERRASTOP™ HANDYROLLS

Terrastop Handy-Rolls are non woven needle punched geotextile made from durable, rot proof, UV resistant polymer. Specifically designed to allow water to filter through while restricting soil particles. Available in widths from 0.6m, 1.0m and 2.0m by 50m length and easy to handle, ideal for small projects.

TERRASTOP™ WOVEN RANGE

Woven geotextiles are made from polypropylene and range in strength typically from 15kN to 80kN. They are generally used for subgrade separation and reinforcement applications.

Download PDF Brochure

High strength polyester fabrics ranging in strength from 100-1000kN/m suitable for solving complex engineering problems. They are used to reinforce soils where extremely high tensile strength with low elongation is required. Applications include;

• Road & rail embankments
• Reinforced earth structures on poor foundations
• Slope stabilization
• Piled foundations

TERRASTOP™ PAVING FABRIC RANGE P1 & P2

Terrastop Paving Fabric Range P1 & P2 are made from polyester spunbonded continuous fibres, mechanically bonded by needle punching. They are specifically manufactured for pavement application such as spray sealing and asphalt resurfacing. All rolls come in continuous lengths up to 300m to minimise delays and heavy duty cores to avoid collapse due to handling and moisture.

Download PDF Brochure

Case Study: TerraStop Paving Fabrics to Reinforce Chip Seals

ROADTAPE

Roadtape is a self-adhesive sheet membrane constructed from woven polypropylene mesh and a bitumen-polymer adhesive compound. Roadtape is made in Australia. The product is a tough, durable self-adhesive sheet with an overall thickness of 1.8mm. Its primary use is for bridge and road applications. Being water and vapour resistant Roadtape has many waterproofing applications in the construction industry. Ideal for carpark decks, culvert and bridge deck joints.