TerraStop® PP Woven Geotextiles are often used for separation, reinforcement and stabilization in the construction of pavements.
TERRAM Handy rolls & Minipaks are produced from Bi-component technology using PP/PE blended polymers making them very robust geotextiles.
The TerraStop® HVL is superbly manufactured for separating contaminated and non-contaminated soils with its high visibility layer needled punched Nonwoven Geotextile.
TerraStop® Paving Fabrics are superbly designed for the maintenance and repair of road surfaces such as spray sealing and asphalt resurfacing.
E’GRID® is a rigid biaxial geogrid commonly used for subgrade reinforcement, rock stabilisation and erosion control.
TerraGrid® HSG is a high strength coated geogrids which are manufactured from high tenacity polyester (PET) yarns, knitted to form a structured grid.
TerraGrid® C asphalt reinforcement geogrid provides the best solution to prevent reflective cracking in asphalt overlays.
E’DRAIN® Bi-Planar and Tri-Planar Geonet are used in drainage systems in conjunction with a geotextile to replace traditional materials such as sand and gravel.
FreDrain® Strip Filter is a composite drain and collection system consisting of a three dimensional, high-flow drainage core which is wrapped with a non-woven filtration geotextile.
TerraDrain® is a dimpled plastic sheet that provides effective drainage and waterproof membrane protection on foundation walls and other underground structures.
Polyfabrics Drain-Cel® provides a perfect solution for sub-soil drainage application for creating a successful Roof Garden, without any traditional problems associated with cracking or leakage.
Polyfabrics Drainage Tank Modules are the perfect sub-surface drainage system made from lightweight recycled polymers.
TERRAM PW1 Is a trackbed separator is designed to maintain separation between the adjacent sand/ballast layers within the trackbed construction, preventing the upward movement of fine sub-grade particles.
TERRAM PW2 is a geocomposite- a robust separator/filter incorporating a stiff net between two textile filter layers.
TERRAM PW4 is a composite formed from TERRAM PW1 and E'GRID® geogrid. E"GRID® improves track life and performance by stiffening ballast laid over weak ground
TERRAM PW9 is a Robust Separator for trackbed, designed where the sub-grade soils are good but contain angular stone.
TERRAM Hydrotex® provides a permanent way and high speed solution for trackbed stability that not only acts as a filter/separator for fine soils, but also removes the requirement for a sand blanket or filter medium.
TEC Mat® Jute is 100% organic and is the traditional erosion control blanket used to protect soils in areas exposed to wind or high rainfall.
TEC Mat® Coir is a natural fibre matting made from 100% natural coconut fibre that is spun and woven into a matting which is suitable for erosion control. It is also known as TMC (Tec Mat Coir) 4, 7 and 9
EcoLog® are coir logs made from 100% natural coconut fibre compacted into an outer mesh of bristle coir twine.
TerraMat® is a three dimensional anti erosion mat consisting of entangled polypropylene mono filament fibres that are heat bonded to provide a dimensionally stable matrix to control soil erosion.
TerraMat® Grass is a lightweight, three dimensional erosion mat with a grid structure on the underside
TerraMat® 3D is a synthetic turf reinforcement mat, which protects underlying soil from erosion and provides a reinforcing matrix for vegetative root growth.
StratawebTM Geocell is a 3 dimensional expandable cellular confinement system of various depths made from HDPE. It is used to confine various infill’s and provide stability on slopes and channels.
TERRAM GrassProtecta™ is a heavy duty, thick, slip resistant polyethylene grid. It is used to reinforce and protect grassed surfaces
TERRAM TurfProtecta™ lightweight polyethylene mesh is used to reinforce grassed areas intended for very occasional/infrequent light vehicular or pedestrian use.
TERRAM Bodpave™ 85 is a porous plastic cellular paving grid for reinforcing grass or gravel where a permeable/porous surface is required.
Detectamesh is a coloured plastic mesh for marking and detecting buried underground pipes, cables and services.
Fairwarning ® is a composite tape and extruded coloured plastic mesh for marking and detecting buried underground pipes, cables and services.
Tapex Mains Marker Non-detectable Underground Warning Tapes are coloured polyethylene tapes printed with a warning message to identify underground pipes and cables to Australian and New Zealand Standards. They can be manufactured with any text, in any language, any colour and size manufactured to your specification.
Wavelay® is a detectable underground warning tape incorporating one or two 0.7mm AISI 316 grade stainless steel tracer wires laid in a sinusoidal wave pattern, and laminated between two layers of low density, lead free, virgin grade rot-resistant polyethylene.
Protect cables and pipelines under streets and footpaths. A-Tag markers are embedded into concrete or asphalt. The warning message is molded right into the tag and cannot be removed. These brightly colored, UV stable markers are slightly recessed, so cannot be dislodged. The A-Tag is UV stabilized and fade resistant, even after years of outdoor exposure. Great to identify valves, splices etc.
The Rhino SoilMarker is a lower profile way to mark buried services in areas where homeowners will not tolerate upright marker posts or unsightly signs. RhinoPoly construction makes the SoilMarkers extremely durable. They will not crack, break, or significantly fade for at least 10 years. The one piece design has a 100mm diameter surface and a 200mm stake.
The Rhino TriView Marking System’s patented design provides 360° visibility, as well as superior functionality you won’t find in any other damage prevention marking product. Use the TriView marker post for new damage prevention installations, or to upgrade existing metal posts to high visibility markers.
Provides a warning message in hard to mark areas. Rhino TriView™ signs solve utility marking problems when you cannot bury a post but need a highly visible marker that is three dimensional, with clear warning messages on each side.
The RhinoPoly VentGuard™ quickly converts rusty metal vent pipes into maintenance free, high visibility pipeline markers. Ensures a potential hazard is highly visible.
Copperhead Copper Clad Steel provides the best tracer wire solution for future location of underground pipes and cables. Stronger, cheaper & lighter than copper with the same conductivity. Strong, but conductive, corrosion resistant and a lot less likely to break when you put it through the rigors of underground construction. The volatility of the price of copper is minimized and its attractiveness to copper thieves diminished. Copperhead’s innovation brought the underground construction industry a superior performing product at a more economical price. Copperhead Industries sets the standard for copper-clad steel tracer wire
The TriView Test Station is the most durable and flexible test station available. It will protect tracer wire from mowers while warning potential excavators to make a one-call. Made from RhinoPoly™, the TriView Test Station will help cut costs by also serving as a pipeline marker and being highly visible.
Tapex Termite Resistant Tracer Wire is laid over pipes and cables alone or in conjunction with other underground safety warning products.An electric current passed through the wire enables accurate detection on the surface by instrument.
3M EMS Full-Range Markers provide an accurate, convenient, long lasting method of marking underground facilities. The marker has a range of up to 2.4 metres from marker to locator.
The 3M™ Ball Marker makes the job of precisely locating underground facilities easier. The 3M EMS Ball Markers have a unique self-levelling design that provides an accurate, horizontal position regardless of how the ball is placed in the ground. They have a range of up to 1.5 metres from marker to locator and can be accurately located using a 3M™ Dynatel™ Locator.
3M EMS Near-Surface Markers provide an accurate, long lasting method of marking underground facilities. The markers have a range of up to one metre from marker to locator and can be programmed to include customer specific information (iD version).
3M has developed an effective way to locate the path of underground plastic pipes and conduits, eliminating the need, problems and costs associated with tracer wire and test stations. 3M™ Electronic Marking System Caution Tape uses a new EMS marker technology embedded into a caution tape for installation near or above the buried facility and helps provide continuous path location.
Any damage to buried cables is costly, inconvenient and dangerous. The importance of underground cable protection covers, so crucial to preserving essential services such as electricity, gas and telecommunications, therefore cannot be understated. Cable cover suppliers Tapex stock a quality range made to Australian Standards, to help that buried cables and pipelines remain capable of delivering their primary functions.
The OVERPIPE HDPE Mechanical Protection Plate was developed in collaboration with the Research and Development Department of GDF Suez to provide an alternative to concrete slabs. With a thickness of 15 mm and a length of 1800 mm, we offer HDPE plates with widths from 1250 to 1800 mm designed to protect large diameters buried pipelines (high pressure gas, hydrocarbons etc…). Made of injected HDPE, the plates are designed to resist the assault of a 32 tonne excavator.
Used to safeguard pipes and cables buried underground from excavation damage, protection mesh provides that extra bit of visual warning and resistance that could prove crucial in the event of a poorly planned excavation. Tapex stocks a quality range that can be customised to meet your specific project requirements. We deliver across Australia so call (02) 9502 6000 or email email@example.com to place your order.
PipeArmour is an extruded plastic mesh used to wrap pipes for protection from rock damage when backfilled. Tapex manufacture the PipeArmour range, covering a comprehensive range of applications.
Working on or around exposed pipelines requires an increased level of safety and awareness. Installing Safety Wrap as soon as pipes or cables are exposed will protect the integrity as well as the vital coatings from any degree of accidental line strike.
These locators combine advanced digital processing and simple interfaces to quickly locate 3M™ EMS Path Marking Tape/Rope & electronic markers (balls, near-surface, full range, etc.).
The 7500 series provides accurate pipe, cable, or sonde depth measurements, giving a digital readout. All Dynatel locators 7500 series and fault finders are also compatible with select GPS/GIS field mapping instruments for real time mapping of electronic markers or pipe and cable facilities. The locators are easy to use, featuring a simple menu-driven interface that lets you select audio sounds and enable or disable receiver frequencies depending on your needs. They read and write to 3M iD markers.
The C.A.T4 digital platform delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities. The C.A.T4 Avoidance Mode™ lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan. Features such as the bargraph ‘tidemark’ enable an operator to quickly spot a peak response and zero-in on a buried conductor.
Radiodetection’s precision locators are designed for optimal locate performance for all industries and utilities. Common to all is the powerful Centros™ measurement engine, based on more than 30 years of development. Centros delivers a powerful digital signal analysis platform and provides the operator with a comprehensive suite of reliable and accurate information.
Installing anodes at all dead ends of the tracer wire system improves the locate signal. Grounding a tracer wire system completes the circuit for accurate locates and allows you to mark the pipe location with pinpoint accuracy. The Copperhead grounding anode enhances the locate transmission and improves the signal for the locator.
The Kinnears blow lines are light but strong for minimal kinking for pulling cables through conduit and pipes. Often used in Fibre Optic Cable installation into main ducts.
The Kinnears 3mm orange polypropylene ropes are braided for minimal kinking for pulling cables through conduit and pipes. Often used in Fibre Optic Cable installation into main ducts.
The Kinnears “Telstra” polypropylene ropes are designed for maximum strength and minimal kinking for pulling cables through conduit and pipes. Often used in Fibre Optic Cable installation into main ducts.
OptiCell™ is a flexible fabric innerduct system designed to increase cable deployment efficiency, enabling installation of up to 300% more cables than rigid HDPE innerduct in conduit based network infrastructure. The unique textile envelopes allow single or multiple encased cables to conform to the shape of the conduit and reduce wasted space.
Milliken tapes reduce handling, eliminate conduit damage and improve length accuracy during cable hauling. Market leaders in quality, strength and durability.
Medium duty plastic mesh barrier fence, Budget will last at least 3 months outside in normal conditions.
Light duty plastic mesh barrier fence. Economy barrier fence will last at least 1 month outside in normal conditions.
Heavy duty plastic mesh barrier fence, Enduro will last at least 12 months outside in normal conditions.
Heaviest duty plastic mesh barrier fence on the market. Hi Viz will last at least 24 months outside in normal conditions.
Every day in public spaces and workplaces where construction or maintenance works are taking place, there is the potential for hazards that may cause injury,or worse. Ensuring the safety of the people completing the work and also those who use the space daily is paramount. One product that’s helpful in promoting the need for caution around potentially hazardous areas is safety tape– an item thatshould be an essential part of any occupational health and safety plan.
Tapex can make a range of custom warning tapes in lengths of up to 2000m, widths of up to 1.2m. Custom printed promotional barrier tapes are high quality non-adhesive special print barrier tapes, custom printed in any colour, design or size to your specifications.
Tapex’s Premium Safety Tubes cover a wide range of hazardous-area delineation applications. They are also ideal for highlighting star pickets – that can create a hazard in themselves on building sites.supplier in your city!
Root Guard is a semi rigid black medium density polyethylene sheet used for the prevention of root problems
Tubex has been at the forefront of shelter development since the first research into treeshelters came into fruition in the early 1980’s.
WeedStop® is made from both nonwoven geotextile and woven geotextile depending on the weeds you are trying to control.
TerraStop® Silt Fence is a woven geotextile manufactured in Europe from high quality UV resistant polypropylene and designed to specifically reduce soil sediment run off from building sites.
TerraStop® Silt Curtains, also known as Sediment Curtains or Flotation Curtains are designed to control sediment, algae or debris movement in waterways.
Shade cloths are used for a number of applications. Originally designed for privacy and providing additional shade to your areas of work or domestic use.
These products are constructed from our TerraStop® Woven Silt fence range. These bags are especially made for filling with blue metal gravel, sand or other general filter mediums.
These are manufactured from UV stabilised non-woven geotextile. They are designed to filter out fine particles and contaminated fills.
All our hard wood wooden stakes are produced locally within each state of Australia. We have a range of size options available along with painted stakes upon request.
All our Bamboo Stakes are made from natural bamboo. They are a strong and durable option to Hardwood stakes, and suitable for all plant and tree plantations.